Avatar feed
Responses: 5
PO1 William "Chip" Nagel
5
5
0
Sgt (Join to see) Hopefully You don't expect Me to Remember the Channels and Order in the Multiplexing, Been a Long Time since I was Involved with SATCOMs.
(5)
Comment
(0)
SPC Michael Terrell
SPC Michael Terrell
9 mo
C-band was 24 channels, using Vertical or Horizontal polarization . All odd channels used one polarity while even channels used the other. I still have a Microdyne C-band signal generator built for use at their factory. We built equipment for CATV, MATV and TV Broadcast. Our main product was Telemetry receivers that could be used on any band, with the proper downconverter.
(2)
Reply
(0)
Sgt Commander, Dav Chapter #90
Sgt (Join to see)
9 mo
Whatever the technology might be, PO1 William "Chip" Nagel, new or old, I am always interested, as it defines how much we have learned over the last several hundred years or maybe as far back as the 1500's or more! LOL!!!
(2)
Reply
(0)
PO1 William "Chip" Nagel
PO1 William "Chip" Nagel
9 mo
Sgt (Join to see) - A Hopeless Romantic Geek, Like Me!
(1)
Reply
(0)
Avatar small
SPC Michael Terrell
4
4
0
I repaired a lot of that equipment, and built some of it. For instance, the old C-band satellite TV was uplinked at 6GHz. It was down converted to 4GHz, amplified and transmitted back to earth. Some antennas covered the entire United States, while others concentrated on one half of the country or the other, The birds used Traveling Wave Tubes to produce up to 20 Watts. There were usually a couple spares aboard and had relays to swap out a defective TWT. Basic receiver design was based on original Telemetry or RADAR receivers, including a 70 MHz IF. In fact, the first receivers I serviced were Rockwell-Collins Telemetry receivers modified for C-band. $4,000 each, and crap design.
(4)
Comment
(0)
Avatar small
1SG John Millan
3
3
0
Interesting
(3)
Comment
(0)
Avatar small

Join nearly 2 million former and current members of the US military, just like you.

close