Posted on Aug 16, 2018
How to Zero a Scope and Rifle for Long Range Shooting
2.44K
28
11
10
10
0
"If you’re going to shoot long range, you need to make sure your zero is perfect."
Good to know if you don't already.
Good to know if you don't already.
How to Zero a Scope and Rifle for Long Range Shooting
Posted from ammoland.comPosted in these groups: 
Firearms and Guns
Long Range Shooting
Firearms and Guns Long Range Shooting
Edited >1 y ago
Posted >1 y ago
Responses: 9
4
4
0
3
3
0
The easiest way to sight in a new scope is to have it secured in a gun vice (I use the Caldwell Lead Sled) and fire 2-3 rounds at 25 yards without moving the rifle. Adjust the scope to the POI and you should be very close. Fire for effect and verify zero and adjust as needed. Then you can move to the 100 yard line and reverify zero, and go from there.
(3)
(0)
TSgt David L.
SPC Steve Irvine - You covered it well Steve. I laugh at folks who bore sight only and then try to go out to 100yds.
The scope bases that have MOA built into them are tapered to be thicker at the front so you don't run out of scope adjustments for long range (not sure but the bases I've seen had +20 MOA built in) shooting. I'm sure it varies by scope brand but you probably don't need that unless you are 700 or so yards or more.
The scope bases that have MOA built into them are tapered to be thicker at the front so you don't run out of scope adjustments for long range (not sure but the bases I've seen had +20 MOA built in) shooting. I'm sure it varies by scope brand but you probably don't need that unless you are 700 or so yards or more.
(0)
(0)
3
3
0
Read This Next
Continue with Facebook 
Continue with Google