I recently started making custom coin racks, share your talents as well.

SFC(P) Aaron Fore — Fri, 24 Apr 2015 09:17:19 -0400

Response by SGM Private RallyPoint Member made Apr 24 at 2015 9:22 AM

SGM Private RallyPoint Member — Fri, 24 Apr 2015 09:22:05 -0400

Some of my more recent projects.

Response by SFC Michael Faircloth made Apr 24 at 2015 9:36 AM

SFC Michael Faircloth — Fri, 24 Apr 2015 09:36:03 -0400

Some of my projects.

Response by SFC Michael Faircloth made Apr 24 at 2015 9:39 AM

SFC Michael Faircloth — Fri, 24 Apr 2015 09:39:41 -0400

Other Paddles I have done for some Navy buddies.

Response by SFC Michael Faircloth made Apr 24 at 2015 9:41 AM

SFC Michael Faircloth — Fri, 24 Apr 2015 09:41:39 -0400

Cornhole boards I have done.

Response by CW4 Private RallyPoint Member made Apr 24 at 2015 2:43 PM

CW4 Private RallyPoint Member — Fri, 24 Apr 2015 14:43:26 -0400

Custom cornhole design with drink holders. I also used pocket hole screws underneath the board so there are no screw hole on the top surface for bags to snag on. The last photo shows custom graphics that I did in InkScape (Freeware) and had printed on vinyl. I sold about 5 sets of these boards for $300. Not a bad deal if you have the time.

Response by CW4 Private RallyPoint Member made Apr 24 at 2015 2:55 PM

CW4 Private RallyPoint Member — Fri, 24 Apr 2015 14:55:31 -0400

Here are a couple of Time Out benches that I made. The first is made out of red oak. I painted the routed letters black and then used a natural colored stain and polyurethane. The second bench I made for a friend whose last name was Stone. This bench was made out of pine and I added custom vinyl decals before adding the poly.

Response by CW4 Private RallyPoint Member made Apr 24 at 2015 3:06 PM

CW4 Private RallyPoint Member — Fri, 24 Apr 2015 15:06:51 -0400

Here is a beer bottle cap coffee table I put together. I used a prebuilt coffee table, cut out the center and built the bottle cap portion lay flat in the coffee table.

Response by CPO Bernie Penkin made Apr 24 at 2015 3:32 PM

CPO Bernie Penkin — Fri, 24 Apr 2015 15:32:02 -0400

Here are some pens that I turned a while back. Building a kitchen island right now.

Response by SFC Michael Faircloth made Apr 24 at 2015 3:37 PM

SFC Michael Faircloth — Fri, 24 Apr 2015 15:37:30 -0400

Another desk I put together. And also a hope chest with a drawer.

Response by LTC Hillary Luton made Apr 24 at 2015 3:47 PM

LTC Hillary Luton — Fri, 24 Apr 2015 15:47:11 -0400

Very nice. I admire those who are good at shaping the wood. I am only good at decorating it. OK, I can at least use the scroll saw, but most of the time I buy the boxes or plaques already cut and made. As I've mentioned before, I do wood-burning and add the color using oil pencils and/or water colors.

Response by SFC(P) Aaron Fore made Apr 25 at 2015 9:48 PM

SFC(P) Aaron Fore — Sat, 25 Apr 2015 21:48:36 -0400

Started this one today. Any suggestions or thoughts?

Response by SGT John Wesberry made Apr 26 at 2015 8:22 AM

SGT John Wesberry — Sun, 26 Apr 2015 08:22:17 -0400

Nice to see fellow military and veteran's craft work. Thanks guys, never thought about posting my stuff before.

Response by Sgt Michael Johnson made Apr 26 at 2015 10:18 AM

Sgt Michael Johnson — Sun, 26 Apr 2015 10:18:06 -0400

I do this for a living, so --. Here is one of my latest projects, custom hard maple island.

Response by SFC(P) Aaron Fore made Apr 28 at 2015 9:23 AM

SFC(P) Aaron Fore — Tue, 28 Apr 2015 09:23:42 -0400

Here is the finnished coin rack for field artillery, I forgrt who wanted to see the finnished product.

Response by SN Craig Ralston made Apr 30 at 2015 1:18 AM

SN Craig Ralston — Thu, 30 Apr 2015 01:18:20 -0400

Here's what I've been doing in my "spare" time. The 2 on the left are a cutting board that I made, the Adirondack chairs were a spontaneous making, I thought my deck needed some more seating. and the cabinet on the right is a cabinet that I made for our master bath.

Response by SFC(P) Aaron Fore made May 9 at 2015 9:31 AM

SFC(P) Aaron Fore — Sat, 09 May 2015 09:31:51 -0400

My Lil man cave for my projects. What is your man cave like?

Response by MSgt Private RallyPoint Member made May 15 at 2015 1:15 AM

MSgt Private RallyPoint Member — Fri, 15 May 2015 01:15:12 -0400

Nice coin rack! I've been thinking about making these as well. How wide and deep are the dadoes for the coins to sit in?

Response by SFC(P) Aaron Fore made Jul 20 at 2015 11:24 AM

SFC(P) Aaron Fore — Mon, 20 Jul 2015 11:24:37 -0400

My latest coin rack for the Infantry, any thoughts?